Magnetic drilling machine, 200mm - 8", 220 V.

Magnetic drilling machine, brushless motor, annular cutters max. dia 200mm - 8", power supply tension 220 - 240 Volt, power supply frequency 50 - 60 Hertz, rotation direction bidirectional.

Order code

ECO.i20

EAN code

8720999145323

Order

ECO.i20

Extreme power. Every RPM under control.

200 mm cutting capacity is impressive. Knowing exactly what happens at the spindle? That's where things get interesting.

Meet the Euroboor ECO.i20, part of the new i-Series, bringing advanced induction technology to portable magnetic drilling. Power is generated through magnetic fields instead of carbon brushes, direct electrical contact or permanent magnets, reducing wear and heat build-up for continuous use in demanding environments.

Succeeding the ECO.200S/T, it combines 2,800 W of brushless induction power with an impressive annular cutting capacity of Ø200 mm (8"), making this the biggest and most powerful machine in our range. And it doesn't stop at drilling. With tapping up to M52, right/left rotation and precise speed adjustment, even demanding threading applications are within reach.

The ECO.i20 also handles twist drilling and reaming up to Ø50 mm (2") and countersinking up to Ø205 mm (8 1/16"). This versatility allows operators to perform a wide range of machining operations with one machine, reducing the need for additional equipment on site.

The real difference? RPMi technology.
It's not just about controlling how fast the motor runs. It's about knowing exactly how fast your cutter turns.
By displaying the actual spindle RPM in real time, the ECO.i20 goes beyond conventional magnetic drilling machines that rely on estimated spindle speeds, giving operators complete control over cutting speed for greater accuracy, efficiency and tool life.

RPMi brings four key components together in one intelligent system:
• RPMi induction motor: Powerful, brushless induction motor delivers stable torque across the full speed range.
- Minimal speed drop under load (<10%) and reduced wear compared to conventional motor technologies.
- Higher productivity, predictable performance, and longer machine service life.
• RPMi four-speed gearbox: Transfers motor power into a very broad speed range on the spindle, covering 39 - 916 rpm (no load) to 35 – 883 rpm (load).
- Mechanically optimized gearbox allows precise speed selection across a wide variety of drilling applications.
• RPMi electronic speed control: Fine-tunes the RPM to match your cutter type (HSS or TCT), diameter and material.
- This improves hole quality and cutting efficiency while reducing heat generation, tool wear and overall tooling costs.
• RPMi digital display: Shows the actual spindle RPM in real time. Operators can immediately verify the true cutting speed under load and make adjustments when needed, instead of relying on estimated values.

The exceptionally wide speed range also makes the ECO.i20 suitable for twist drills, which require higher rotational speeds. The ECO.i20 combines the capacity of a large magnetic drilling machine with the speed range and control needed for precision drilling.

Not sure which RPM to use? Scan the QR code on your machine to access the Euroboor cutting speed calculator. Select your cutter type, material and diameter to find the recommended cutting speed.
No guesswork. Just the right cutting speed, with real-time feedback to help you maintain precision, improve cutting efficiency and reduce unnecessary tool wear.

Add 3,680 kg (8,113 lbs) of magnetic force, Gyro-Tec, SensorTec and advanced electronic protection, including torque overload protection that automatically stops the motor under excessive load and protection against power surges and unstable power supplies that safeguards the electronics. Together, these systems protect the operator, machine and tooling, improve reliability and reduce the risk of damage, downtime and costly repairs, making the ECO.i20 an exceptionally complete machine built to handle extreme demands.

An integrated motor cable minimizes the risk of snagging and cable damage during operation, improving durability and operator safety.

ECO.i20. Maximum capacity. Precision in every revolution.

Accessories

Properties
Fact sheet
Package contents
Parts list / manual

Properties

Gyro-Tec

Overload protection

Power fluctuation protection

Overheat protection

Integrated motor cable

Magnet LED indicator

Power surge protection

Tapping

Adjustable speed

Digital display

Oil lubricated gearbox

R/L rotation

Brushless motor

RPMi Technology

Induction motor

Connection
minimum diameter threading (inch)	1/8
minimum diameter threading (millimeter)	M3
maximum diameter threading (inch)	2 3/64
maximum diameter threading (millimeter)	M52
minimum diameter annular cutters (inch)	1/2
minimum diameter annular cutters (millimeter)	12
maximum diameter annular cutters (inch)	8
maximum diameter annular cutters (millimeter)	200
minimum diameter countersinking (inch)	3/8
minimum diameter countersinking (millimeter)	10
maximum diameter countersinking (inch)	8 1/16
maximum diameter countersinking (millimeter)	205
minimum diameter twist drills (inch)	1/16
minimum diameter twist drills (millimeter)	1
maximum diameter twist drills (inch)	2
maximum diameter twist drills (millimeter)	50
connection 1 model	inside
connection 1 size (inch)	1 1/4
connection 1 size (millimeter)	31.75
connection 2 morse taper / drill chuck class	MT4
connection 1 type	Weldon
connection 2 model	outside
connection 2 type	morse taper
Dimensions
stroke (inch)	10 3/64
stroke (millimeter)	255
magnet length (inch)	13 25/32
magnet length (millimeter)	350
magnet width (inch)	4 59/64
magnet width (millimeter)	125
magnet height (inch)	2 19/32
magnet height (millimeter)	66
minimum height (inch)	25 19/32
minimum height (millimeter)	650
maximum height (inch)	35 5/8
maximum height (millimeter)	905
length (inch)	20 9/32
width (inch)	10 7/16
length (millimeter)	515
width (millimeter)	265
height (inch)	25 19/32
height (millimeter)	650
Properties
rotation direction	bidirectional
type of gear box lubrication	Oil
magnetic force (kilogram)	3680
magnetic force (pound)	8113
electric rotation speed adjustment	yes
nett weight (pound)	128.97
nett weight (kilogram)	58.5
system of measurement	mm (metric)
application	Drilling, Countersinking, Tapping
Performance
no-load minimum rotation speed gear 1 (rotations per minute)	39
no-load maximum rotation speed gear 1 (rotations per minute)	110
no-load rotation speed gear 1 (rotations per minute)	110
load minimum rotation speed gear 1 (rotations per minute)	35
load maximum rotation speed gear 1 (rotations per minute)	106
load rotation speed gear 1 (rotations per minute)	106
rotation speed gear 1 (rotations per minute)	110
no-load minimum rotation speed gear 2 (rotations per minute)	87
no-load maximum rotation speed gear 2 (rotations per minute)	248
no-load rotation speed gear 2 (rotations per minute)	248
load minimum rotation speed gear 2 (rotations per minute)	79
load maximum rotation speed gear 2 (rotations per minute)	238
load rotation speed gear 2 (rotations per minute)	238
no-load minimum rotation speed gear 3 (rotations per minute)	146
no-load maximum rotation speed gear 3 (rotations per minute)	413
no-load rotation speed gear 3 (rotations per minute)	413
load minimum rotation speed gear 3 (rotations per minute)	132
load maximum rotation speed gear 3 (rotations per minute)	400
load rotation speed gear 3 (rotations per minute)	400
no-load minimum rotation speed gear 4 (rotations per minute)	327
no-load maximum rotation speed gear 4 (rotations per minute)	916
no-load rotation speed gear 4 (rotations per minute)	916
load minimum rotation speed gear 4 (rotations per minute)	294
load maximum rotation speed gear 4 (rotations per minute)	883
load rotation speed gear 4 (rotations per minute)	883
Supply
motor power (Ampère)	25.0
motor power (Watt)	2800
total power (Ampère)	26.3
total power (Watt)	2950
power supply frequency (Hertz)	50 - 60
power supply current	AC
power supply connection	plug according CEE 7/7
power supply source	mains supply
power supply type	Corded electric
power supply tension (Volt)	220 - 240
Usage
minimum working temperature (degrees Celcius)	-20
maximum working temperature (degrees Celcius)	50
maximum working temperature (Farenheit)	122
Other
minimum working temperature (Farenheit)	-4
rotation speed gear 2 (rotations per minute)	248
rotation speed gear 3 (rotations per minute)	413
rotation speed gear 4 (rotations per minute)	916

Fact sheet

Download fact sheet

Package contents

1x metal case
1x magnetic drilling machine ECO.i20
3x (Capstan Hub) handles
1x spindle holder MT4 - Weldon 31.75 mm (1 1/4") including cooling/lubrication ring (ECO200.MC4/32)
1x spindle holder MT3 - Weldon 19.05 mm (3/4") including cooling/lubrication ring) (IMC.30/19-N)
1x Morse taper reducing adapter from MT4 to MT3 (IBK.MC4-MC3)
1x drift key
1x lubrication/cooling system
1x Allen key 2.5 mm (3/32")
1x Allen key 5 mm (13/64")
1x Allen key 6 mm (14/64")
1x safety chain
1x ear protection
1x safety goggles
1x safety gloves
1x user manual

Manual

Download Manual

First name

Last name

Country

E-mail address

I'm a dealer
I'm an end user