TCT.KIT/10S-M1

Cutter kit, TCT, DoC 35 mm, Dmin 14 mm, Dmax 26 mm.

Cutter kit. 3 x HMSU.140, 3 x HMSU.180, 2 x HMSU.220, 2 x HMSU.260, 1 x IBC.75, 1 x IBC.80. Packed in plastic case.

Order code

TCT.KIT/10S-M1

EAN code

8720663018007

Order

TCT.KIT/10S-M1

DoC 35 mm
TCT.KIT/10S-M1
Our TCT.KIT/10S-M1 contains Tungsten Carbide Tipped Annular Cutters. Euroboor TCT cutters are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. Our TCT cutters are equipped with high precision Weldon shanks*. The TCT.KIT/10S-M1 is a ten piece TCT cutter sets with DoC 35 mm. The set comes with two pilot pins. Besides TCT cutter sets with metric sizes, we also over TCT cutter sets with imperial sizes. And both ten and six piece TCT cutter sets.

*On request we also provide our sets with double shank design (Nitto/Weldon).

Properties

Connection
connection 1 model	outside
connection 1 size (inch)	3/4
connection 1 size (millimeter)	19.05
connection 1 type	WelNit
Dimensions
diameter pilot pin hole (inch)	1/4
diameter pilot pin hole (millimeter)	6.35
inside / minimum diameter (inch)	35/64
inside / minimum diameter (millimeter)	14
outside / maximum diameter (inch)	1 1/32
outside / maximum diameter (millimeter)	26
cutting depth (inch)	1
cutting depth (millimeter)	35
Properties
products in kit	3 x HMSU.140, 3 x HMSU.180, 2 x HMSU.220, 2 x HMSU.260, 1 x IBC.
material	tungsten carbide tipped
system of measurement	mm (metric)
application	drilling
Other
total product quantity included in kit	12

Connection

connection 1 model

outside

connection 1 size (inch)

3/4

connection 1 size (millimeter)

19.05

connection 1 type

WelNit

Dimensions

diameter pilot pin hole (inch)

1/4