ECO.200S/T

Magnetic drilling machine, 200mm - 8", 220 V.

Magnetic drilling machine, brushless motor, annular cutters max. dia 200mm - 8", power supply tension 220 - 240 Volt, power supply frequency 50 - 60 Hertz, rotation direction bidirectional.

Order code

ECO.200S/T

EAN code

8720143711039

Get a quote

Meet the largest and most powerful magnetic drilling machine in our range: the ECO.200S/T. With a maximum drilling capacity of 200 mm or 7 7/8" and tapping and countersinking possibilities, this machine gives you the ability to make truly extreme adjustments on workpieces and locations that normally are impossible to do.

The adjustable speed and RL rotation makes this machine perfect for tapping. It also offers the precision needed to match the drill to the annular cutter and the material being drilled. Harder materials such as stainless steel and alloy steels must be drilled at lower speeds whereas softer materials such as aluminum can be drilled at higher speeds.

The ECO.200S/T has a brushless motor, which makes it more efficient than brushed motors.
Brushless motors are more efficient than brushed motors because they eliminate the friction and energy losses associated with brushes. As a result, brushless motors typically produce more power and consume less energy, which can lead to longer battery life and reduced operating costs.

With the ECO.200S/T in your portfolio you have a very versatile machine which give you more power and offer you solutions that others can only dream of.

ECO.200S/T digital display and speed control knob

When you turn the electronic speed control knob, the display will change the number between 140 and 284. The digital display shows the number of revolutions per second of the motor. The gearbox slows down the number of revolutions to the correct speed on the shaft. The following calculation is used to calculate the no-load speeds of the axle.

Revolutions per minute = Max. RPM gearbox setting : 283.3 x Engine revolutions per second (Display number)

With this calculation you can accurately determine the number of unloaded revolutions per minute of the shaft. This allows you to work more efficiently and accurately with different types of drills, different drill diameters and different materials. In addition, the core drills you use will last longer.

Accessories

Tab Properties
Tab Fact sheet
Tab Package contents
Tab Parts list / manual

Tab Properties

Gyro-Tec

Overload protection

Power fluctuation protection

2 way magnet (TempTec)

Overheat protection

Integrated motor cable

Magnet LED indicator

Power surge protection

Tapping

Adjustable speed

Oil lubricated gearbox

R/L rotation

Brushless motor

Connection
minimum diameter threading (inch)	1/8
minimum diameter threading (millimeter)	M3
maximum diameter threading (inch)	1 7/8
maximum diameter threading (millimeter)	M48
minimum diameter annular cutters (inch)	7/16
minimum diameter annular cutters (millimeter)	12
maximum diameter annular cutters (inch)	7 7/8
maximum diameter annular cutters (millimeter)	200
minimum diameter countersinking (inch)	3/8
minimum diameter countersinking (millimeter)	10
maximum diameter countersinking (inch)	2
maximum diameter countersinking (millimeter)	50
minimum diameter twist drills (inch)	1/16
minimum diameter twist drills (millimeter)	1
maximum diameter twist drills (inch)	2
maximum diameter twist drills (millimeter)	50
connection 1 model	inside
connection 1 size (inch)	1 1/4
connection 1 size (millimeter)	31.75
connection 2 morse taper / drill chuck class	MT4
connection 1 type	Weldon
connection 2 model	outside
connection 2 type	morse taper
Dimensions
stroke (inch)	10 1/16
stroke (millimeter)	255
magnet length (inch)	13 3/4
magnet length (millimeter)	350
magnet width (inch)	2 5/8
magnet width (millimeter)	125
magnet height (inch)	13 3/4
magnet height (millimeter)	66
minimum height (inch)	25 9/16
minimum height (millimeter)	650
maximum height (inch)	35 5/8
maximum height (millimeter)	905
length (inch)	20 1/4
width (inch)	10 7/16
length (millimeter)	515
width (millimeter)	265
height (inch)	35 5/8
height (millimeter)	905
Properties
rotation direction	bidirectional
type of gear box lubrication	oil
magnetic force (kilogram)	3680
magnetic force (pound)	8113
electric rotation speed adjustment	yes
nett weight (kilogram)	58.5
system of measurement	mm (metric)
application	drilling, countersinking, threading
Performance
no-load minimum rotation speed gear 1 (rotations per minute)	40
no-load maximum rotation speed gear 1 (rotations per minute)	80
no-load rotation speed gear 1 (rotations per minute)	80
load maximum rotation speed gear 1 (rotations per minute)	75
load rotation speed gear 1 (rotations per minute)	75
rotation speed gear 1 (rotations per minute)	80
no-load minimum rotation speed gear 2 (rotations per minute)	60
no-load maximum rotation speed gear 2 (rotations per minute)	125
no-load rotation speed gear 2 (rotations per minute)	125
load minimum rotation speed gear 2 (rotations per minute)	46
load maximum rotation speed gear 2 (rotations per minute)	120
load rotation speed gear 2 (rotations per minute)	120
no-load minimum rotation speed gear 3 (rotations per minute)	145
no-load maximum rotation speed gear 3 (rotations per minute)	300
no-load rotation speed gear 3 (rotations per minute)	300
load minimum rotation speed gear 3 (rotations per minute)	110
load maximum rotation speed gear 3 (rotations per minute)	285
load rotation speed gear 3 (rotations per minute)	285
no-load minimum rotation speed gear 4 (rotations per minute)	230
no-load maximum rotation speed gear 4 (rotations per minute)	470
no-load rotation speed gear 4 (rotations per minute)	470
load minimum rotation speed gear 4 (rotations per minute)	174
load maximum rotation speed gear 4 (rotations per minute)	452
load rotation speed gear 4 (rotations per minute)	452
Supply
motor power (Watt)	2800
total power (Watt)	2950
power supply frequency (Hertz)	50 - 60
power supply current	AC
power supply source	-
power supply type	corded electric
power supply tension (Volt)	220 - 240
Other
rotation speed gear 2 (rotations per minute)	125
rotation speed gear 3 (rotations per minute)	300
rotation speed gear 4 (rotations per minute)	470

Tab Fact sheet

Download fact sheet

Tab Package contents

1x metal case
1x magnetic drilling machine ECO.200S/T
3x (Capstan Hub) handles
1x spindle holder MT4 - Weldon 31.75 mm (1 1/4") including cooling/lubrication ring (ECO200.MC4/32)
1x spindle holder MT3 - Weldon 19.05 mm (3/4") including cooling/lubrication ring) (IMC.30/19-N)
1x Morse taper reducing adapter from MT4 to MT3 (IBK.MC4-MC3)
1x drift key
1x lubrication/cooling system
1x Allen key 2.5 mm (3/32")
1x Allen key 5 mm (13/64")
1x Allen key 6 mm (14/64")
1x safety chain
1x ear protection
1x safety goggles
1x safety gloves
1x user manual